Recent content by Peter-Erik

Thanks

Too bad

@Bolle Thanks for your input (all) The Rom says "ProNitron GA+ 19Rev.20" (I presume the White label on the chip) "However, without the TMS graphics chip, the card will no show anything at all" is this really true? I ask this because in the case of Udo there was no chip (send him direct...

@Coloruser the person how started this topic had the same card as me. (and found it in his Q700)

HI All, I found this card, seems OK, added to my Q700 but no video but gets warm. Questions: - Left below there is no "processor/chip" is this necessary? - Do I need to install the software to see a picture at all? - With answers above with resolution do I need for the adapter (DB15 to VGA)...

This one?

So can someone identify this Card ? For me thanks I read the topic but not sure which model (it looks looking at the date an early model?)

Replaced C6 and it is now working shutdown works 👌 (C6 was weird, two capacitors serial connected)

PSU this model ASTEC AA15830 Used https://68kmla.org/bb/index.php?threads/iici-power-supply-recap-and-component-identification.41364/ as replacement guide DigiKey list is the list I used Clean so much as possible with Isopropyl alcohol Checked the board and don't see anything strange or...

@croissantking thanks for message

Back on the Quadra

Have no other PSU for test , have no internal HD need to buy a bluescsi for intern but test it with an db25 bluescsi first. So you think that the screen message is not normal?

Hi all, get an Quadra 700 before I started the Mac I did first a recap of the Power Supply is start and runs. It boot form an external BlueSCSI But when I do a shutdown is see an messahe "It is now safe to switch off your Macintosh" is this normal? and if yes how do I shutdown it? If I hold...

Thanks

Use it as a example