NJRoadfan's latest activity

  • N
    NJRoadfan replied to the thread TashTalk USB.
    Some packet sniffing is in order. If the iPrint works like most bridges, it should be transmitting RTMP packets every 10 seconds...
  • N
    NJRoadfan replied to the thread TashTalk USB.
    ZipGetNetInfo is never used on LocalTalk, its a Phase 2 thing. I don't have an AsanteTalk, but I know real routers (FastPath, Netatalk's...
  • N
    NJRoadfan replied to the thread TashTalk USB.
    On a single network (no router), the client should broadcast a NBPLookup packet to the network. On networks with a router, the client...
  • N
    NJRoadfan replied to the thread TashTalk USB.
    Since its now available, the Phase 2 Addendum is a good document to review...
  • N
    NJRoadfan replied to the thread TashTalk USB.
    The heavy lifting of LocalTalk-to-Ethertalk Phase 1 or 2 would be handled by the bridge device, not TailTalk. For Phase 2 operation, if...
  • N
    NJRoadfan replied to the thread TashTalk USB.
    Clients on the iPrint should be sending NBP Broadcast Request directly to the router on the network. NBP Lookups should only be coming...
  • N
    NJRoadfan replied to the thread TashTalk USB.
    From Inside AppleTalk: Node ID $FF indicates a broadcast to all nodes with a network number equal to that indicated by the specified...
  • N
    NJRoadfan replied to the thread TashTalk USB.
    09:00:07:FF:FF:FF is the default broadcast address for EtherTalk Phase 2 and it could change depending on zone. Only Phase 1 used...
  • N
    It should be working at the moment..... I need to pull out my RPi and check with 4.5.
  • N
    Well, at least we know that there was SOME reasoning behind that Low End Mac article on the x200/x300 machines being brain dead.
  • N
    NJRoadfan replied to the thread TashTalk USB.
    Netatalk (and I presume Apple's AFP server) all mangle the longer AFP 3.x Unicode names down to 31 characters for AFP 2.x clients using...
  • N
    NJRoadfan replied to the thread TashTalk USB.
    I'll get it over later today. I'm assuming this is detected as an off-the-shelf USB-to-serial bridge. The user is likely to have to...
  • N
    NJRoadfan replied to the thread TashTalk USB.
    Ah, the joys of dealing with pre-Unicode systems and protocols. I eventually have to get one of these USB adapters. Now that Netatalk...
  • N
    NJRoadfan replied to the thread AppleShare Client for System 4.
    http://www.applefool.com/se30/files/ASWS1.1%20Installer.image.Hqx
  • N
    NJRoadfan replied to the thread AppleShare Client for System 4.
    AppleShare 1.1 should work with System 4/Finder 5.5. The disk is bootable and contains that system version. I use that version in mini...
Back
Top