Recent content by maxheap

They are 16V rated, should be good as its only being fed 12v max from the PSU.  I included a picture of the RAM if anyone sees anything off with my solder job or anything else. Also, is there a certain RAM chip that always goes bad and where do you source replacement chips?  I'm wanting to...

One thing I forgot to add.  I ran out of 1uf and used some 10uf in their place.  Any issues with that on the recap?

I used to have parts LC's but I eventually fixed them all.  Weird thing yesterday was that, I cleaned the board again and I got the three bars instead.  Today I continue to get the vertical stripes.  I'm assuming it has to be the memory now and I'll have to pick some up to try.  Wish you could...

Thanks Effen, I'm going to check into this more.

Thank you very much uniserver for the links.

I also reseated the ROMs and still have the issue.

The search I did was more around the larger bars and replacing the capacitors, which I did and I'm still at the vertical bar screen.  Can you help point me in a direction of a good prior post for my issue?  

 I was getting three black bars, so I thought I'd replace the caps on the motherboard, but now I'm getting vertical stripes (I also got this after cleaning, but thought the caps were just too far gone). I can't find good documentation for a Classic II, but I'm leaning towards the power supply...