Recent content by MacDoctorFL

New Encoder Fixed it.  

Yep thats how I have the screen shot.      I'm not a HEX or whatever this is friendly, so I'm not sure about Identifying the ROM version. Any help??  Thanks in advance.       http://mcosre.sourceforge.net/docs/rom_v.html

http://mcosre.sourceforge.net/docs/rom_v.html

I'm in same boat. I've read this thread and reformatted with Lido, still not able to boot on the plus. . I can see and transfer back and forth.  Even loaded Sys 7.1 on to it from a PM8500. Im Stuck.  Should I seek out a newer set of Plus roms?   Iquired via interrupt switch for rom version. an...

Have you tried to boot without extensions?

According to a NETbsd website https://ftp.netbsd.org/pub/NetBSD/NetBSD-7.0.2/mac68k/INSTALL.html the FEAST chip is used in Asante fast 10/100 cards. Could those drivers work??

I don't know if it will help. Maybe find a driver based on which DECchip your bluestreak uses. .Em DECchip 21041 -- This is the second chip in the Tulip family, dubbed .Dq Tulip Plus . It supports 10Mb/s speeds over a built-in serial interface. The serial interface has support for 10BASE-T...

Did you wash the mobo? Just asking.

I've narrowed it down to possible keyboard decoder. Ordered one in with any luck will have it fixed in 10 days.

   So Christmas is coming and I wanted to take a crack again at a few games like MS FilghtSim 1.0, Drol, DigDug to name a few. My  AppleIIe had a 4mhz Transwarp card that wouldn't cut FlightSim. A whopping one frame a second while sitting on the runway. This just wont do. So I ordered a...

Found it at macintosh repository.  https://www.macintoshrepository.org/11915-codewarrior-pro-2

IIFX Ram

fraveydank

Thanks Guys! A lot to consider.  I'm not a programmer or an engineer. Just thought with all the effort in figuring out the Protocache1 thread that a combined device based on a super cheap SBC (either R-pi, FPGA, or x86) could be affordable.  Even was thinking if a modified VNC client or USB to...

Would it be possible to make a PDS slot card to hold a R-Pi or other SBC to act as an ethernet adaptor and video out. Power requirements would be low. Just a thought. Any takers? This is my first post. Hello World! and fellow 68k-ers.