joevt's latest activity
-
Jjoevt replied to the thread My Mad B&W G3 Setup!.The suggestion was to switch master and slave after getting the HD to boot. Switching the devices means the HD would not have the same...
-
Jjoevt replied to the thread My Mad B&W G3 Setup!.Changing the device master/slave setting changes the device's Open Firmware path.
-
Jjoevt replied to the thread My Mad B&W G3 Setup!.The B&W G3 has device aliases that you can use for the boot device path: 0 > devalias pci /pci bridge...
-
Jjoevt replied to the thread Pop-up menus on System 6.A DLOG combines the info of a WIND with a DITL. Dialogs can be modeless - meaning you can interact with other stuff while it is...
-
Jjoevt replied to the thread My Mad B&W G3 Setup!.0c:00:10 is FireWire OHCI https://admin.pci-ids.ucw.cz/read/PD/0c/00 0c:03:10 is USB OHCI https://admin.pci-ids.ucw.cz/read/PD/0c/03 OF...
-
Jjoevt replied to the thread Does anyone have a 667MHz or 800MHz Powerbook G4?.I created a 32K ROM in the Test1 folder in the attached zip. The ROM is using version 113-XXXXX-210 of the Rage Mobility Mac firmware...
-
Jjoevt replied to the thread My Mad B&W G3 Setup!.Open Firmware in the B&W G3 is missing mass storage drivers for USB and FireWire. These can be found in later versions of Open Firmware...