iigs123's latest activity

  • I
    iigs123 replied to the thread TashTalk USB.
    I was going to try to focus on the tailtalk/localtalk side of things to get the ImageWriter showing up and printing first. Being naïve...
  • I
    iigs123 replied to the thread TashTalk USB.
    I tried your zip-support branch to see if my iPrint adapter would show any results, and it does not. I think the iPrint device is a...
  • I
    iigs123 replied to the thread TashTalk USB.
    I was going to run another test by capturing from tailtalk - i added capture to the nbp-lookup - but I wanted to observe and capture...
  • I
    iigs123 replied to the thread TashTalk USB.
    I pulled out my LCII and installed AppleTalk Peek on it. Is there a better program to capture the localtalk packets? I setup a...
  • I
    iigs123 replied to the thread TashTalk USB.
    The Imagewriter works just fine direct to the G3 with the iPrint off.
  • I
    iigs123 replied to the thread TashTalk USB.
    I really appreciate both of your work. This is an interesting thing to tinker with, debug and learn rust. I also thought it would be...
  • I
    iigs123 replied to the thread TashTalk USB.
    The iPrint device is pretty straightforward and has no configuration. Basically plug in a phonenet cable and ethernet and go. I use it...
  • I
    iigs123 replied to the thread TashTalk USB.
    I double checked wireshark, and the nbp packets are not being re transmitted from phonenet to ethernet by the iPrint device. I suppose...
  • I
    iigs123 replied to the thread TashTalk USB.
    The latest changes seem beneficial, however i'm still only seeing my powerbook G3 over localtalk and not the imagewriter and not my...
  • I
    iigs123 replied to the thread TashTalk USB.
    with the latest code & my windows ethernet changes i'm able to see my netatalk instance over ethernet, but still nothing over tashtalk...
  • I
    iigs123 replied to the thread TashTalk USB.
    The ImageWriter shows up now too. I should add that this is over ethernet on windows - localtalk still doesn't show everything...
  • I
    iigs123 replied to the thread TashTalk USB.
    Hard-coding a destination network to '0' in the lookup packet looks to be a fix. Netatalk shows up in the results now. It is too early...
  • I
    iigs123 replied to the thread TashTalk USB.
    I pushed some changes to the windows-support branch on my fork. I also updated pap-print to enable tashtalk, based on the nbp-lookup...
  • I
    iigs123 replied to the thread TashTalk USB.
    I have more changes for windows that I'll commit to my fork, soon. I've added conditionals so it compiles cleanly on windows & mac. I'd...
  • I
    iigs123 replied to the thread TashTalk USB.
    Rust question: Do you have suggestions or links on how I should separate windows-specific code? Unless I'm mistaken...
Show older items
Back
Top