Recent content by GorfTheChosen

Sorry. I have no idea.

Capacity testing and internal resistance check on eighteen 18650 cells completed: aH ___ IR 2.89, 0.020 2.90, 0.010 2.90, 0.012 2.91, 0.015 3.05, 0.016 3.05, 0.030 3.05, 0.032 3.06, 0.010 3.06, 0.016 3.06, 0.028 3.06, 0.033 3.07, 0.010 3.07, 0.027 3.14, 0.010 3.15...

Started capacity testing cells numbers 13 - 16 this morning. A bit of a slow process as the default charge/discharge rate is only 300mA. Previously charged batteries do indeed show some variation ... both in capacity and internal resistance. The replacement Seesii battery spot welder has been...

Replacement battery welder showed up the other day, thought it was something else and didn't bother to open the package until today. It's now on the charger. Tenergy Battery charger showed up today. It's now running a capacity test on the first four 18650 cells.

Have checked initial voltage on all of 18 cells. They all pretty much read 3.48v as delivered with a couple flicking up to 3.49v, or down to 3.47v, for a moment before coming back to 3.48v. All cells were sequentially numbered and marked with a Sharpie with their initial voltages. The cells...

Referencing these from another thread since this is probably the more relevant thread: What did you do to your Apple/Mac today? What did you do to your Apple/Mac today? After some back and forth with the seller (having to do with where the replacement welder would be shipped from and how -...

Scope this out and see if it helps any: https://forum.vcfed.org/index.php?threads/what-are-these.16207/

OP, The VideoVision breakout bar that I have is surplus to my needs since I have the VideoVision SP upgrade (... which, truthfully, I'm not using either) If you are interested drop me a PM.

Think it supports higher resolutions ... a max of 1152 x 870 @ 256 colors from what I'm reading/recall. Not quite accurate ... I believe the card can be used to drive a regular computer monitor with a suitable cable, as above. In terms of video capture and output, there were three options...

How about some pictures so we can see exactly what it is you have ?

Unless of course you position the unit such that it's exhaust is blowing into the Pismo's intake port on the right side next to the DVD/hdd bays. It was delivered just a little bit ago and I have to say I'm fairly impressed. Feels pretty hefty, nice packaging. Comes with 31" long USB-A ---->...

I do have an extra DVD drive from the spare parts Pismo. Might have to have a look and disassemble that and see if it’s practical to repurpose that as removable fan housing. Would need to see if the incoming airflow could be routed to the processor card area. Might well be possible to...

Yes. Will have to look at the values in my kext here though and see if they match what @greystash has posted there. Possibly. Right. I have identified the solder pads on the power pcb that the power connectors for the DVD drive and batteries connect to. What I have not done is probe those...

Just to be clear, the Pismo was never fanless so far as I know ... always had one. And one could certainly do quite a lot ... without causing the fan to come on. But that's likely due to the high temperature threshold Apple set before the fan would activate and turn on. Like I said...

As the thread title suggests I have serious overheating issues when the processor is under prolonged heavy loads. This occurs when the computer is working on processor-intensive tasks of long(er) duration (>30 minutes) The issue appears to be entirely due to the fact that computer's fan will...