Fred1212's latest activity
-
FFred1212 replied to the thread G4 cube dead.A recap and still dead!!
-
FFred1212 replied to the thread G4 cube dead.And its dead again For no apparent reason won't boot again. I've not read anything about caps being a problem on cubes but is it a...
-
FFred1212 replied to the thread G4 cube dead.Some success did another PRAM reset and got to the flashing folder screen. Looks like the CDROM and HD are cactus so next I'll try a...
-
FFred1212 replied to the thread G4 cube dead.Yes tried that as well
-
FFred1212 replied to the thread G4 cube dead.Yes have speakers and get no chime. I'll try the external drive but have no video just black screen. No usb mouse light up. Doesn't...
-
FFred1212 replied to the thread G4 cube dead.Hi herd thanks for replying. Single press switches it on, red light on AB and HD spins up if IDE cable is disconnected. Press and hold...
-
FFred1212 replied to the thread G4 cube dead.Hard drive spins up when power button is pressed but only if the ide cable is not connected
-
FFred1212 replied to the thread G4 cube dead.As above I have a dead cube but the power supply seems OK , solid 28v and 12v and 5v on the drive power connector. Power switch appears...
-
FFred1212 replied to the thread Modern G4 Cube PSU replacement?.Nice work and economical as well
-
FFred1212 replied to the thread Macintosh Plus analog board issue.You may need to put a different heat sink on it as it is reversed. There looks to be plenty of stock of these worldwide which is good.
-
FFred1212 replied to the thread Macintosh Plus analog board issue.Q10 is 2SC3152 a transister NPN 6A 100W should be able to find an equivalent and Q12 is an SCR couldn't find this one though. Q10 won't...
-
FFred1212 replied to the thread Macintosh Plus analog board issue.At least something happened. Swap them out and hope that is the problem. Probably change Q10 and Q11 and check all the resistors
-
FFred1212 replied to the thread Macintosh Plus analog board issue.Maybe a silly idea but make sure that the connections on the interconnecting cable from the analogue to Digital board are all clean and...