Fred1212's latest activity
-
FFred1212 replied to the thread SE/30 recap - capacitor pads lifting, looking for advice.I've found its the amount of cap goo leakage that affects the pads causing them to lift with either method
-
FFred1212 replied to the thread Zuluscsi RP2040 adaptor?.Thanks already have a laptop version but no laptop!
-
FAnyone know if its possible to adapt the 2.5" laptop version of zuluscsi to work on 50 pin scsi eg SE etc?
-
FFred1212 replied to the thread pretty decent iMac G4.Yes 9.2.2 runs really well on these
-
FFred1212 replied to the thread G4 cube dead.Update: Still dead. A job for another day. Managed to find a replacement Logic in the UK
-
FFred1212 replied to the thread pretty decent iMac G4.Nice score
-
FFred1212 replied to the thread G4 cube dead.Should the light on the switch stay on . When I press mine the light comes on but then goes of again
-
FFred1212 replied to the thread G4 cube dead.Power button seems to work but could be a problem? One short press switches the red led on thge logic on a lond press switches it off...
-
FFred1212 replied to the thread G4 cube dead.And its dead again!! tried to install MacOS 9.2 started OK then froze and won't go again. I think its the logic board unfortunately
-
FFred1212 replied to the thread G4 cube dead.OK bit the bullet and put the XPC7400 RX486PK in and miraculously it works. Looks like its only a 350mhz chip? but it is at least...
-
FFred1212 replied to the thread G4 cube dead.Just hunting through the junk box. I've a XPC7400 RX486PK, the cube has a XPC7400 RX450SK. Can I try this to see if its the CPU? Also...
-
FFred1212 replied to the thread G4 cube dead.@Scorpio tested video card in G4 tower works.
-
FFred1212 replied to the thread G4 cube dead.Thanks done all the cleaning, checks etc thinking logic. I've replied to your DM cheers
-
FFred1212 replied to the thread G4 cube dead.A recap and still dead!!
-
FFred1212 replied to the thread G4 cube dead.And its dead again For no apparent reason won't boot again. I've not read anything about caps being a problem on cubes but is it a...