François's latest activity
-
François replied to the thread G4 cube dead.IIRC there is two regulators on the main board: one for the USB 5V and one for the FireWire 12V. And on some boards, depending on the... -
François replied to the thread G4 cube dead.Do you have the Cube speakers, or an USB audio module? It could help to know if the Cube will chime. If you have an external FireWire...
-
François replied to the thread Replacing IDE HDD with optical drive on Performa 6320CD.But for CD-ROM drives you need the IDE bus to be ATAPI compliant. Quoting Wikipedia:
-
François replied to the thread G4 Cube processor spacer.Lost items always end up in the most improbable places! And by the way, anyone knows why there is a sticker on the IDE cable that says...
-
François replied to the thread G4 Cube processor spacer.Maybe you can find a standard metallic spacer that would fit? It would not have the smaller rings protruding from each end, but I think...
-
François replied to the thread SE/30 PDS Card stacks & CRT Anode EMI.Another solution, maybe simpler than rotating the CRT, would be to put the PDS cards elsewhere! If the hard drive is replaced by a...
-
François replied to the thread New Project: DoubleVision SE/30 Card.Just so you know, and sorry about that, but: Mac is short for Macintosh. You do not write it in ALL CAPS. Thank you.