Recent content by dust bunny

Possible a dumb question... I can run a (Philips) VGA flat panel screen from the 6100/60, is it possible to run a 20" HD Cinema desplay?

I'll have a look for the guages. There isn't a Cache stick in it, 6100/60 didn't ship with a stick, and I've only pluged in my 256kb stick to check it works. It's currently in the same box as my Acard aec7732.

Indeed they did, but I think I they were only for 7100 and 8100 (and 9150?) - I could be wrong (I hope I'm wrong on this). When I took the heat sink off the MAXpowr MXP6100, it had a thermal pad, not grease. It was intact so I decided to leave it, at leave it for the time being. I've tried the...

If I can find/make time this weekend, I'll try and install 7.6.1, 7.1.2 being too early makes sense I guess. Err, guages? 
 If I was buying the drive hardware today, I would absolutely buy the BlueSCSI or similar, not the Acard aec7732 (SATA to SCSI), adaptor and SSD. But, when I bought the...

And then I found this page... https://blog.pizzabox.computer/posts/powermac-surprise/#&gid=1&pid=2 I don't get the "MAXpowr G3 newertechnology" extension piece when I boot up. I guess the speed bump, is just because 7.1.2 is much less demanding than 9.2.2? Which means the G3 card is...

Please post lots of pics!

I've used a no-name clone, worked fine for me, never had any issues with it.

I’ve spent this evening disabling system 9, and installing 7.5.(1?) it all appeared to work perfectly, so I installed the Newer Technology driver. It seemed like a good idea at the time, but when it suggested I should Restart, it then couldn’t start. It got stuck immediately after the Newer...

And then…

I’m going through a very dusty box of stuff and…

But I have an Acard AEC 7732 on my shelf, only just out of arms reach. And the 68pin to 50pin SCSI adaptor is on the same shelf.

Thanks, I'll do that, this weekend if not before. I have an Acard AEC 7732 68pin SCSI to SATA, plus a 68pin SCSI to 50pin SCSI adaptor. Plus 2 Samsung 256gb (850EVO) SSDs.

Well, I've drawn a blank, how do I disable (but not delete) the Mac OS 9 System folder to instal 7.1.2 on the same disk alongside it? Can I get get a 256GB SSD to be a bootable 'disc' for the 6100? Does it need to spoof an Apple HDD? The Software I have, is the Software I have - ATM. I did...

Stumbled on these while surfing...

Purely for the sake of completeness... 42MHz x 16 = 672MHz 43MHz x 16 = 688MHz 45MHz x 16 = 720MHz 48MHz x 16 = 768MHz 50MHz x 16 = 800MHz