dschnur's latest activity
-
Ddschnur replied to the thread Macintosh Classic No Audio..01mm magnet wire, lots of flux, and clean solder. You can also just run a jumper wire from the via behind the button to the pin on...
-
Ddschnur replied to the thread Macintosh Classic No Audio.One more thing. Make sure the contacts in the audio jack are working. There are slider contacts inside the switch ( you need to remove...
-
Ddschnur replied to the thread Macintosh Classic No Audio.Check it with a meter. That's the best bet.
-
Ddschnur replied to the thread Macintosh Classic No Audio.For something like this, I normally remove the chips in question, clean the pads, then take a meter and check from pad to via, or from...