-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
Coloruser's latest activity
-
Coloruser replied to the thread Power Mac 7500-9600 Bus Speed Overclocking.Well done @obsolete ! Back in 1996-2000, when working at a CPU card maker, the L2 was always the issue when trying to reach the 60Mhz... -
Coloruser replied to the thread Daniël's PowerPC BGA chip swaps.Yes it does. Some cards only work within the „simpler“ Tanzania L2 Slot as they can boot directly from there because of the differences...
-
Coloruser replied to the thread Sonnet SATA card in G4.In my G4s, some of the newer SATA III SSDs have shown compatibility issues with SATA I mode on SIL based SATA I cards — even though...
-
Coloruser replied to the thread Strange Nubus Graphics card.Looking for TMS 34020s on eBay, you can see them on sale from 70€ (32Mhz) up to 130€ (40Mhz). So, I guess @Bolle is right, they...
-
Coloruser replied to the thread Strange Nubus Graphics card.@Bolle i will send you a PM to discuss how to extract the ROM
-
Coloruser replied to the thread Strange Nubus Graphics card.@Peter-Erik See the attached image - that’s my Pronitron GA21 - means it runs at 1152x870. The GA19 will ru at the typical 19“...
-
-
Coloruser replied to the thread Strange Nubus Graphics card.I guess, the card is missing the video controller in the left bottom corner. A TI TMS34020….
-
Coloruser replied to the thread Two G4s in a beige!.The G3 has only very limited multiprocessor support and I donˋt think a G3 and G4 Tandem will really work - let aside the socket fit...
-
Coloruser replied to the thread Benchmark confusion.On my MDD 1.25 dual, I am getting around 59mb/sec with an SSD on the ATA66 Bus and 95mb/sec on the ATA100 bus. The same SSD on the SATA...
-
Coloruser replied to the thread Benchmark confusion.The G3 b/w as well as the beige G3 benefit from the SATA card. The Sawtooth G4‘s ATA66 bus is almost as fast as a SATA PCI card...
