Byrd's latest activity
-
Byrd replied to the thread x86 card revival thread.We will see! Concerned about shielding and need to double check pinouts but was fun making up the cable. It’ll run the Pentium MMX for... -
Byrd replied to the thread x86 card revival thread.I bought an OrangePC 530 card from Mr @Powerbase and courtesy of @jeremywork pinout sleuthing earlier in this very thread, here is the...
-
-
Byrd replied to the thread My attempt at an ANS ROM.I realise this is very much a one off, but if you can make another I’d be keen to purchase - Australian here keen to learn more about my ANS
-
Byrd replied to the thread ImageWriter II - 2 Missing Dots.I’d look out for a second ImageWriter locally - they are not particularly hard to find nor expensive.
-
Byrd replied to the thread Performa 6205 powers, but no picture or boot?.Check PSU voltages first
-
Byrd replied to the thread 8100, apple vision 17” and 8.5.1.It's the OS, there is a specific driver for the AppleVision CRT which is assigned to the Monitors & Sound Control panel probably Mac OS...
-
Byrd replied to the thread Phoenix: Open-Source NuBus FPGA Accelerator for 68040 Macs.I think the project was AI theoretically based with not much substance … that might explain the 404
-
Byrd replied to the thread SCSI to SATA?.There are plenty of options for modern hard drive replacements, what about a Blue or Zulu SCSI, install a high quality SD card and...
-
Byrd replied to the thread Two cards found in a G4 DA.The Formac card is a Permedia III-based chipset, it is excellent for 2D but very early 3D - was released late in the cycle as a cheaper...
-
Byrd replied to the thread Mobius 030 Accelerator Problem.It doesn't look in the wrong position in the pic ... I'm sure you can find another part.
-
Byrd replied to the thread USB cable link PC/Mac drivers.Got it! Manual here - branded as ATEN here: https://assets.aten.com/product/manual/un_161.pdf And Mac, Windows drivers here (hopefully...
-
Byrd replied to the thread USB cable link PC/Mac drivers.This link, says the brand is ハイパーツールズ or "Hypertools", there might be an Archive.org website for it somewhere. Keep in mind it's USB...
-
Byrd replied to the thread 6360 issues - no post with comm II slot populated.Check the Commslot for any pin damage/debris/clean it You can put a Mac compatible PCI network card in the 6360 is only single slot but...
-
Byrd replied to the thread IIci will not power on.Yeah, no matter how hard you try to remove corrosion/cap goo from, it can always bite back or degrade long term
-
Byrd replied to the thread World Tune-up: Restores audio in World Builder games on AV and PPC Macs.Cool, hope to try it soon - the nasty laugh from Enchanted Scepters needs to be heard :D
