Recent content by BL!

I was thinking the same. I don't know how Techstep operates and looks "IRL" but a GUI similar to that would be nice.

Well, Adrian Black is using Tera Term in his demonstration video so I have to assume it's working. I think the only mentioned thing apart from baud rate, stopbits etc. is a slight delay on character transmits. Below screenshot is from Adrians video (he sets the transmit delay to 1 msec/char)...

In ZTerm I didn't choose anything apart from speed, stopbits, handshaking etc. and in Tera Term I think it's set to VT100 by default. But when in diag mode you cannot choose anything on the Macintosh side, it is what it is.

Thanks but it's already set to CR (tried setting it to different settings as well).

Hi! I was thinking of testing out a serial cable in order to be able to diagnose motherboards when needed (inspired by the video Adrian Black posted a while ago). Using ZTerm on the Macintosh side and Tera Term on the PC/Windows side to verify the connection first. Adjusted the settings the...

Hmm, I only got a 20MB-ish HD with the above parameters. Also, it felt kind of slow (took like half an hour to initialize), anyone see any that should be changed in the above?

I'm actually accessing the SCSI2SD right now with the Apple HD SC Setup v7. 3.5 (initializing right now), so happy days, real progress being made here now! :) I wonder if it was the space in the version number or something? Thanks for the help, guys!  ;)

This is the settings I'm having now (should I alter anything?):

SCSI Probe (thanks a lot LaPorta!) found the card which I presume is good news! :-) I will double-check the settings once again. There are plenty of other options that might or might not be checked/enabled as well.

Yes, I normally have a SCSI drive attached (at this moment a Quantum 500MB) and that works so at least the internal bus is fine (haven't tried the external port as I don't have any external SCSI device).

Yes, I think I have the correct settings (tried a couple of different ones as well). I'll see if I can get Lido onto a diskette and try that.

I used the utility for Windows to access the card via the Micro USB interface on the card. I've done the settings and saved them to the card so that works (if I read them I get the same back). The HD setup doesn't see a SCSI device at all, is that normal? I'm thinking that if it was a size...

I have a SCSI2SD v5.1 card that I recently bought, I've flashed it with the latest firmware available and I'm able to set configuration but when I hook it up to my SE/30 (with working SCSI bus) it's just flash the red LED every 5-10 seconds or so and I can't see the device from the OS HD setup...

If you have a working copy of the 5.6.1 drivers I'm very interested. I've managed to test the 5.2.9 drivers and the installer says that it cannot find the card. I have 6.0.8 OS installed right now. I haven't been able to run any other tool(s) which can scan the bus for the card. The Mac Con...

I don't know if I wrote that but essentially what I meant was that even though I removed the RAM modules the screen was the same upon startup (i.e not a RAM issue but something else on the mainboard (turned out to be missing signals from the UE8 chip due to capacitor leakage).