Recent content by agg24

Wow. How did you find it so easily?

When I originally stripped my //c down for cleaning, I inadvertently messed up the 3 pin component mounting brackets in the Astec internal PSU. I found them very confusing and ended up spinning the screws a lot. Today, after trying the system again, I found it appeared to receive no power at...

Replacing the incorrect 100uF caps unfortunately appears to have made no effect. I am planning to go back over and verify continuity, but I doubt I'll find anything. It's likely that one of the corroded chips is crucial, or otherwise there are corroded traces preventing proper operation, and I...

Looking back at my recapping efforts, I had the same question of whether or not those caps were 10uF or 100uF. I ordered https://www.mouser.com/ProductDetail/Wurth-Electronics/875105359001?qs=sGAEpiMZZMvR1wrj203KOEwKeIe4y6sVy4VYRQR%2b0T7xq1e22dz4ww%3D%3D, but the 100 on the top indicates they...

I did not try adding power after the PSU turns on. It's an interesting idea, though I agree with @bibilit that I think it's a logic board issue. Are you suggesting that one of the caps on the logic board could be shorted?

That linked script is a Windows batch script for doing the FFMPEG encoding. The @set calls set environmental variables, that are then consumed in the actual command to FFMPEG with %envvarname%. To run in macOS, you first need to install FFMPEG (Homebrew is probably the easiest method). Then if...

That machine certainly is pristine. It looks fantastic. What parts did you replace?

That is a strange image format. Could you possibly upload in a format the forum understands so that users don't have to manually download the images?

My adventures in stupidity continue: I was adjusting the CRT to center the image and restore stock proportions, when I suddenly noticed that the well adjusted right side of screen was out of wack. I took a closer look and saw that the edge was slowly moving towards the center of the screen. A...

Turns out I was incredibly stupid and didn't connect the CRT neck grounding wire to the mount points of the CRT. This has happened to me multiple times before now. You would think I would learn... Out of curiosity, what ill effects could/would you experience if you left the computer like this?

I just finished a full logic and analog board recap on my SE/30. Upon initial power on I was greeted by clicking that sounds like sparks/arcing along with the standard boot chime. I immediately turned the machine off, then after a minute or so turned it on again. The clicking did not initially...

Will you release the source? I'd be very interested to look at it.

Nice! Thank you for the fast response. I think you're right about the serial card. I didn't realize it was the one in slot 1, which is indeed rather short.

I found an online listing with an Apple II+ with several cards I cannot easily identify. I was hoping someone here could shed some light on them. Looks like the thick cable may be a SCSI card based on a glimpse of the connector in the last picture.

Most of the error messages are related to being unable to lookup hostnames or other DNS issues At the top it mentions not being able to contact 1.1.1.1, which is a new DNS server provided by Cloudflare, which suggests that this machine was set up recently. wpa_supplicant failed with some unknown...