Trash80toHP_Mini
NIGHT STALKER
No, that'd be CelGen. He's got the NuBus Card & Pivot Monitor to try with stock a stock Mac Video Cable . . . I'm guessing, based upon my confirmation that the Non-NuBus Cards appear to use a standard Mac DA-15 Video Connector Pinout . . . that discovery and confirmation was expedited (gave me a kick in the pants to get started on it again) by the SillyScope Data for the Video Lines and their ground shield complements posted by you for the RCPII/IIsi Card . . . for which I have a working cable . . . which leads me to ASSuME that CelGen needs but try a stock, straight thru Mac Video Cable.Who, me? The problem is that I don't have any cable between the card's pin header and an external connector...
There! PARSE THAT!!!!!!!!!!!!!!!!!!!! )
I'll reply to this in: IIsiColorPivotII_PDS_Card_HackProject™I'll try cutting a (long) female pin header and soldering the cables on the PCB-intended pins :-/