Hi, 64MLA people
I've been trying to make an image of that PB 170 HD (using an Adaptec card, and a 2"5 adapter, and borrowing power from a LaCie CD-ROM reader, the latter two brand new)...
I opened the shell to try and carefully move the drive's arm, (see viewtopic.php?f=10&t=15324&p=146757&hilit=+conner+stuck#p146757), which indeed was stuck.
The arm unlocked, and the shell screws back, I proceeded to connect.
Well, here's the sound it made. :-/
After that sequence, there's a couple-second break, then it starts again.
Doesn't it sound like there's not enough power to spin the motor all up?
Anyone had success fixing this problem?
I've been trying to make an image of that PB 170 HD (using an Adaptec card, and a 2"5 adapter, and borrowing power from a LaCie CD-ROM reader, the latter two brand new)...
I opened the shell to try and carefully move the drive's arm, (see viewtopic.php?f=10&t=15324&p=146757&hilit=+conner+stuck#p146757), which indeed was stuck.
The arm unlocked, and the shell screws back, I proceeded to connect.
Well, here's the sound it made. :-/
After that sequence, there's a couple-second break, then it starts again.
Doesn't it sound like there's not enough power to spin the motor all up?
Anyone had success fixing this problem?