Yep thats how I have the screen shot. I'm not a HEX or whatever this is friendly, so I'm not sure about Identifying the ROM version. Any help?? Thanks in advance. http://mcosre.sourceforge.net/docs/rom_v.html
I'm in same boat. I've read this thread and reformatted with Lido, still not able to boot on the plus. . I can see and transfer back and forth.
Even loaded Sys 7.1 on to it from a PM8500. Im Stuck. Should I seek out a newer set of Plus roms? Iquired via interrupt switch for rom version. an...
According to a NETbsd website https://ftp.netbsd.org/pub/NetBSD/NetBSD-7.0.2/mac68k/INSTALL.html the FEAST chip is used in Asante fast 10/100 cards. Could those drivers
work??
I don't know if it will help. Maybe find a driver based on which DECchip your bluestreak uses.
.Em DECchip 21041
-- This is the second chip in the Tulip family, dubbed
.Dq Tulip Plus .
It supports 10Mb/s speeds over a built-in serial interface.
The serial interface has support for 10BASE-T...
So Christmas is coming and I wanted to take a crack again at a few games like MS FilghtSim 1.0, Drol, DigDug to name a few. My AppleIIe
had a 4mhz Transwarp card that wouldn't cut FlightSim. A whopping one frame a second while sitting on the runway. This just wont do. So I ordered a...
Thanks Guys! A lot to consider. I'm not a programmer or an engineer. Just thought with all the effort in figuring out the Protocache1 thread that a combined device based on a super cheap SBC (either R-pi, FPGA, or x86) could be affordable. Even was thinking if a modified VNC client or USB to...
Would it be possible to make a PDS slot card to hold a R-Pi or other SBC to act as an ethernet adaptor and video out. Power requirements would be low. Just a thought. Any takers?
This is my first post. Hello World! and fellow 68k-ers.