Search results

Yes there where dual clones.. I think its was a Daystar and or UMAX.

I have a 8500 with a G4 carrier ZIF..that if you boot from an external drive without the XLR software all I get is a grey screen. Restart several times it will boot up. But when you boot back to the 8500 drive nothing but grey screen. Ive had to swap out to a 604 card before to get it to...

Did you say you got a G3 card in the machine. That takes a peice of software to run and if the HD is messed up nothings going to happen. Put the 604 cpu back in try to boot from a OS cd. You should make shure the Dimms are the same voltage. Not all 168 pin dimms are the same.

Yes I used an old full size syquest box and put an Apple CD rom drive in it,the small ones will hold a scsi hard drive. I used an old HP usb external burner box and changed the CDRW to one a Mac will reconize.

The very first beige G3 I had would not lite up the screen(VGA) with out the 4mb stick under OS9. Honest...I had to buy one to get the machine to work.

Did someone take out the memory simm,its pugs in right in front of the ZIF.

ReallyCool Dude! Talk like that got me almost ran off another fourm.The G5 Intel Elite would tell you to kick that crap to the curb like they did me. I say stick it to the man and rock that puppy.

Those beige G3 drives had issues when new,they have under run problems. just replace the Cd drive with something better. My mad dog works great. [:)] ]'>

Nice looking machine. That big thingey looks like an ultra wide scsi like the ones on old sun servers. [?]

I have a pro 630 and I love it,have an extra one for parts. Got them at the thrift store for $5 or $6. Theres a place inside for a HD but I dont have the bracket for it. Good luck with your 600,they are built like a tank you know.

Sounds like you need a battery also. Even with out the HD you should see a flashing question mark.

I had this in my files it might help someone:The drives listed below have been verified. (19 May, 2003) We do not guarantee the performance of drives not listed below in regard to creating discs. Furthermore, we do not guarantee all functions of these drives. Manufacturer Drive Model Video CD...

Its an HP92274A or 74A

Nortons disk doctor. Version 3.5 for 7.5 . For 8.1 to 9.x version 6.(norton systemworks)

If you want to do DVD video your better off with a home DVD recorder connected to a video card.

When you unsnap the speaker there are tabs that hold the back of the case on ,if you move the back panel slightly its much easier to reinstal the MB. Its the screw in the middle that holds the MB in place. And you can fix the switch with duck tape untill you find a new case for parts.

I have a 5300ce got at the thrift store. External scsi devices will not mount on the desktop. I have the right SCSI cable. A hard drive,CD rom nor zip drive will mount. SCSI probe sees the drive, when you click mount, nothing. Had to load OS7.5 with floppies. Tried to get in it as a network...

Sounds like an extension conflict. Go into the extensions manager and turn off some third party extensions. Installing conflict catcher is the answer. I had to do that on a 9600.