Search results

Update. I took it to a ebay repair place they are too give it a ultrasonic cleaning and then will recap the motherboard. I have it sent out so fingers crossed I've never done anything like this before

Does anybody have a schematic for this? 

When I took out the motherboard I saw those 2 troubleing things. I just got done with cleaning the entire motherboard with rubbing alcohol and a toothbrush. These pictures where taken before the cleaning

It has a brand new 3.6v battery. It's capacitor time. I didn't see any obviously leaking when I checked last night

Disregard my questions on what I said under mac iivx questions because now I have a new issue my quadra stopped chiming. press power button I hear the speaker pop. nothing. the '040 doesnt get hot anymore(to the touch). and it no longer boots from my 7.5.3 CD anymore-I was trying to get the...

I am trying to use the quadra tv output feature beacuse of the no screw Posts on the video connector. But I pressed the keycombo command option t v. I hear it chime again but I don't see anything on tv no signal. I'm using the yellow rca jack. The cable is known good. The plugs on the...

Beachycove, something like that lol. It was actually facebook marketplace where I got the quadra. You're timing is a little off haha I would of checked yours out probably sometime last week. Good news is my quadra does boot and chime and display video and boot from 7.5.3 cd...it just needs loads...

And I forgot to mention the most annoying part of this mac...the screw posts for the video port are missing so when I stick my mac to vga adapter in there nothing holds it in and of course my monitor loses video signal until I hold it or get something to hold it in the right spot. I took the...

Ok, thanks for that. I also noticed that the floppy drive keeps spinning constantly even with no disk in it. I opened up the flap turned in mac and it's spinning away won't stop until I turn it off. I did order a v5.2 scsi2SD adapter last night

OH! and I forgot to mention the floppy drive does nothing. I put a disk in there I don't hear it trying and I cant eject it. even using the pinhole I hear a motor sound but nothing happens. if I take case cover off I can press the button and then it ejects manually OK

well, the Quadra 660av finally showed up. Horrible packing job by seller broken plastic everywhere the HD caddy the floppy drive-the entire "tray" that is underneath the floppy cd and HDD that is loose as well. I saw pictures of the inside before it was shipped and the HDD was properly in its...

Yeah I heard you can chip both the iivx and the quadra but since I got the quadra on its way I won't touch the mac ii..my understanding is that while the quadra only has one slot it's a PDS slot right?

Cool. I'll worry about that later. First, the PRAM battery thing. I found one on Amazon but it says it's not rechargeable...does it need to be?

Oh, I'm gonna need a PRAM battery apparently beacuse I read that quadra won't boot with a dead one installed

There is that strange looking aaui port on the back of the quadra so assuming that's where the eithernet adapter goes

Well seller was willing to go a bit lower than the centris in price so now I have a mac quadra 660av with cd drive and a quantum hd of some sort on its way

Good to know...the one in my iivx works fine it had some issues ejecting out fully but it was just full of dust. It ejects consistently fine now  Do you get a boost from the at&t DSP in the quadra 660av? In finder or in games?

I didn't wanna dismantle it down to that point again haha I had a lazy spell. I'll upload a photo of that section

Tokyo racer I do have pictures on the trading post here. It's about a $20 difference between quadra 660av and a centris 650. (Quadra more) though the centris has a nubus rj45-coax eithernet card in it. 

A quadra 660av would be a big upgrade then, correct? (I may have a line on one)