Hello!
I would try to set up a basic machine. Minimal RAM, no hard drive, no CD, no expasion cards, no network, nothing.
Did you check that the power supply capacitors are in good condition?
regards
Hi.
Change the C1 and L3 (use a cable for L3).
I turned on the IIFX with floppy disk but no hard drive. The IIFX turned on correctly, showing video and asking for SO.
Turn off IIFX, connect the HDD, turn on the IIFX and PLUFFFF, again explode the C1. Measuring the continuity of C1 and L3, these...
Hello!
I removed the L4 and measured with a multimeter on the smaller scale (2mH) and L4 is smaller.
I will change the capacitor and test if you turn on the computer without L3
Hi.
I buy second hand an IIFX. Replace the batteries and turn it on.
At powering it came smoke from capacitor C1 (476 16) and exploded L3 (I do not know what component it is)
Anyone know which component is the L3?
How can I turn on the power supply to measure if it is giving the correct voltage...
Hi.
I have a Lisa just like the one described by TIMBO.
I connected the flat wire with red wire to the Lite Adapter board and smoke came out of the floppy drive. [:(] ]'> Maybe the floppy disk was bad or maybe the connection was not correct.
Any of the 2 flat cables enter the Lite Adapter...