Mmm could be a problem on the output jack... interesting theory i’ll check. Btw yes i’ll change the caps but with same type, have you got some links for kits? I live in italy btw.
i usually use a jbc 40s with a 0,5 point, it’s a good classic solder i think it should be good for the task, or i...
No, never recapped, psu never recapped, caps are all good lookin'. I don't know if there's corrosion under the chips but they all look very good, the only lookin bad is J22 in the photo.
where's the sound chip on the lc 475? and why the output jack is still workin? it sounds strange to me...
Hello, my lc 475 internal speaker stopped workin after a pair of up and down and cutting volume noises. the output jack works well and I can use it with my vintage creative but I'm scared of this, I love my lc and I want to be 100% functional. I tried the speaker through a sound output and it's...
Finally i installed for a period a quantum fireball se with 2 gig partition. i wasn' t satisfied cause it was very noisy plus i prefer original machines so i found another 40 meg quantum from another se. Now i'd like to use the the quantum fireball se as external hard drive to use with my lc and...
It's all built in the download that slomacuser posted. you can only interact in the control panel and this will change only the boot disk icon. it' s simpler to use it than explain it. just put the icon master control panel in system folder, reboot and than try it :) .to modify default icons...
i know it's a good way but i don' t want to erase disk and reinstall. if u only change icon with lido under 6x without formatting the changes can't bee seen. can be seen only under 7x
ok so i have wrong adapter and wrong hard disk! very well :p
thank you very much for your replies 'cause i was going to buy a np but cheaper than that i posted.
ok stop,i'm tired i won't buy anything. i'm going to find a 50 pin bigger than the original that now is really dead :(
it'll...
http://www.ebay.it/itm/36-4GB-Fujitsu-MAX3036NP-80-pin-SCSI-Hard-Drive-Disk-PER-SERVER-15000rpm-/281827240257?hash=item419e366941:g:0DAAAOSwrklVT5GP
this is what i need? i see the schematic of the pins on the right are the same of the manual techknight posted.
i read 10k is better then 15k...
made a disaster don't know what happened! probably a screwdriver on the table shorted something on the hard disk i'm not sure, there was a little smoke.
switched off, now if i connect the power to this drive the mac produce strange ripetitive sounds and won't boot,quite black screen , but only...
What about working without any bumper? my dead quantum seems to work again after reading this. i found two rubbers that seemed perfect but a little bit larger so the heads went crazy :)
Tried with no bumpers and seems to work, btw i imagine it's no good for the physical stress. unfortunately...
ok so the interface card will work, it's the drive my problem? can you give some example of brands and models of drive known to work? As i wrote i'm really not expert in scsi drives, in the manual you posted the back of the drive is identical except for the jumpers that mine don't have. Is this...
EDIT
sorry it wasn't a 9 gig it' a 36 gig, her the specs:
Fujitsu Impresa 36,7 GB Ultra-320 SCSI HDD SCA 80 Pin 10K rpm 8MB MAP3367NC
specs of the adapter:
KDQ28 SCA 80 Pin to 68 Pin 50 Pin Ultra SCSI II/III Adapter Converter SPC-2603
and the quantum failed after 27 years not 37 :beige...