Search results

I was at a favorite thrift store of mine and I found 2 IIe's with various card in them got both for $25 before taxes, neither of them are working (one just sounds like it has a bad power supply, the other has a board issue) but I have the biggest basement of parts for IIe's so It will work out...

when it says apple II at the top you should be able to type unless you have a floppy drive hooked up then it will want a floppy to do anything.

i could always send you out one for cheap it you need one pm me.

I sell lots of IIe's and this only happened to one customer, I think it was caused by the aging caps in it, I was not there so I can not say for sure, another power supply should fix it or you could very easily just swap out the old caps for new ones and see if it fixes it. I have seen several...

Here are some pictures The front of the computer all cleaned up, Here is a picture I showed before but now that I adjust the video it is much nicer looking, Here here are the profile tags that were dull and had no more paint on the so I took off a small layer of the Grey to reveal the...

well I finally got my power on today and everything on my lisa is working again (I had to repair the Profile install of LOS) but after a fresh install it started right up. I only have small adjustments such as a few keys and adjusting the video switches on the inside. The db25 cable I got...

DUKE NUKEM 3D!

small update: I got my cable today but can not trying it since my power is still out :( will post as soon as I can get power and try out the whole thing again.

I ordered a cable that should be here in the next couple of days, Ive put off making the IDEFile until I have more money to spend on it, but the board is ready to go.

yeah I have several spares (Thanks to my huge collection of apple IIe's and parts. The same cap is in at least one type of apple psu for IIe's.) Switched it out and it fired right back up to solid ready light. Since I think it broke because of my homemade cable getting bumped and then...

well it worked for a bit then the computer shut off. I was going to take out the PSU so I could get the computer back on, I bumped my homemade profile cable and it sparked and blew a cap in the profile. Anyway before that I did get the lisa os installed on the HD and started it. But I fixed...

My blank disks came in and I got system 3.1 all the lisa apps and lisa workshop disks made. So we can only hope the profile will show up tomorrow and I can get this thing going. I did test the first system disk and it did not boot but after cleaning the drive out it booted right up, this drive...

eh it ended I kinda would like a broken one with a good shell since I have an early 1984 mac mouse guts, that should work in the lisa one.

im glad it will be getting use please take good care of it for me :)

wow reminds me of post apocalyptic movies when they have the older computer that they have made up to look warn down a bit I like it defiantly has personality.

thats what I figured and it would look more complete the lisa's with profiles on top always looked a bit more complete then ones without. as far as the IDEfile I have to solder plate the whole board to prevent oxidizing and for the profile adapter socket It is the same one as an apple IIe...

well I got my board etched it looks amazing, before I etched it there were some lines that I could not draw on or carve out so I colored the whole thing in Just 5 little traced and will cut them a part from each other (or if that does not work i will add trace wires and cut all of them, in...

im getting a caps lock key part, so my keyboard should be ready to go. Update! I got a hold of matt and have paid him so hopefully the profile can make it here in one piece and I will have a nice looking lisa!

i found this http://forums.macnn.com/73/mac-modification/305763/clamshell-ibook-questions-lcd-cd-logic/ i hope this helps ps, I have not tried it so good luck.

well he did not mark the other thing i was buying so i was kinda doubting it and he read my last email about how I should pay and never responded. well I hope you are right and I can still get the profile, i was looking forward to having one, also I talked to vintagemicros about getting a...