Hello,
I'm always curious about copy protection and just found out how to use EDD on the Apple II and managed to write back some .woz file to real disks.
I also found the "Essential Data Duplicator Program Information List 4-7" PDF file to help me for some images...
Hello,
I would like to know if the sound chip in the LC II or III can work in an LC?
The chip number for the LC II and III is 344S1033 as for the LC it's 343S1033.
Anyone has any experience with this?
Thank you.
Pitou!
Hello,
A friend and myself succeed making a Lisa 1 work. We copied a LOS 1.0 image to a Profile using BLU.
The Profile boots fine.
However, we're trying to deserialize the image to be able to launch LisaCalc or LisaDraw.
I search through the image using a Hex editor based on the deserialize...
Hello,
My Lisa just started to stretch the image vertically too much.
I tried adjusting the pots. Recapped the video board. Measured the "Height" pot and it seems fine between 0 ohm and around 96 kohm.
It started stretching slowly and finally got this (refer to the attached picture)
Could it...
Hello,
I have a Mac IIfx that I just recapped. I now turns on, but I get no chime/sound at all.
I tested the ROM SIMM and RAM simms in another Mac and it's fine.
Any ideas/pointers?
Thank you.
Pitou!
Hello,
I just recapped a Mac IIcx and it now turns on, but I get the death startup chime.
I was looking at the board and there is nothing at D1 and D2. Does it need diodes there?
If so, what value/number?
Any other idea?
Thank you.
Pitou!
Hello,
I have an issue with an Apple IIgs. The text is kind of doubled in Text mode. When I boot a system disk, in graphic mode, everything is fine. I have some experience in electronics and can also solder. I would like to repair it actually.
Just to make sure, I tried the monitor on another...