No worries - this has been the official Imation Driver ... but obviously it depends on the IDE/USB bridge ...
(via Archive.org) http://www.imation.com/products/data/content/0,1011,1763,00.html
For Windoze there actually is a drive available for "internally" mounted drives ...
Hi,
I salvaged a LS120 drive from an external chassis (without the cable) ...
It's standard IDE and is detected without any problem by OS 9.2,
however it does not load a driver ... fine with that so far.
Unfortunately the Imation drivers which are available seem to only be working with the USB...
Folks,
I recently secured a non-working iMac G4 20".
On receipt it did not do anything - so I disassembled it, cleaned it etc.
I also re-capped the "low-voltage" part of the PSU, replacing the 5 small capacitors.
Now it is happily POSTing and chiming - however the screen stays dark.
Measuring...
Very interesting ... after the soak & brush ... 2-3 times starting from "off" without problems. Last act: fully installing new OS with reboots etc - mo prob.
And then the same story as before started ... starting to chime and stopping after 1/2 second ... so I will most probably
a) get some...
To get this out of the way ... just measured, stable +11.9 and -12.1.
And ... surprise, after the latest scrubbing it's right away booting up the ?-disk ... so I might consider another compete IPA bath ...
Thanks - just did another inspection via the magnifying glass ... and the only visually "maybe unhappy" ship turned out to be U48, which did get a nice soak & scrub - also the surroundings of the other caps did get the brush again.
What I noticed is that, based on the solder marks, F6 did get...
So, I finally was able to procure an 840AV - the seller telling me, he recapped it - to no avail.
No offence, when I did have a look the solder job was not optimal.
De-capping, spending a night in IPA, recapped ... connected - the 840 sprung to life, chimed and presented me with a disc symbol...