• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Search results

  1. tony359

    ROM Replacement for Apple II+

    Hi there, I have an Apple II Europlus (an Apple II+ for Euro market I understand) which might have a faulty ROM as it lands on Monitor every time. I built a "Rom Replacement" card. I don't have AT27C256 so I used an AT27C512. The manual of the card says ...
  2. tony359

    Apple 2 composite capture

    Hi all, I am looking to capture the video output of the Apple 2 - I know it's a special signal which works-ish with modern monitors and capture devices. I have just got an OSSC for VGA/RGB/Component capture and there is a "composite add-on" available which is likely based on the Koryuu...
  3. tony359

    Help with Floppy EMU and .img files

    Hi all, I am having a hard time finding images for my SE as it's a 800K version - so all the images have to be 800K. I wanted to use Hard Disk Toolkit and I found the below: https://macintoshgarden.org/apps/fwb-hard-disk-toolkit-178 I tried all the 800K downloads but the EMU says "Disk image...
  4. tony359

    Miniscribe HDD too many bad blocks

    HI there, I have a dying miniscribe - probably not worth of resuscitating but I'd love to try. The stepper seems fine, I put some lubricant on the bearing as usual! However it would misbehave badly when trying to run anything or re-install the OS. I managed to run Apple Personal Diagnostic...
  5. tony359

    Macintosh SE failing to POST - grey screen

    Hi all, The same Macintosh SE I have been discussing here is showing a weird and intermittent fault. About 50% of times it's powered up, it BONGs, the screen turns on with the grey pattern and about 17 seconds later the pattern gets brighter, I hear a click from the speaker, the mouse pointer...
  6. tony359

    Mouse and Keyboard issue on Macintosh SE

    Hi all This is my first post here, I found this forum while googling for an issue I am having with an SE I am repairing. Basically, the whole ADB stopped working in between reboots - no, I did not hot-plug my mouse! The mouse was working fine before. The system boots up, reaches the desktop...
Top