Search results

I am working through issues on one of these ti4600 mac cards. It boots, but rarely gets to a mac desktop. The one time it was stable enough, I switched to 256 colors and had a lot of randomized noise on the screen. Only the dvi port works, nothing out adc. There are a few missing caps as well...

Surprised I wasn’t able to find anything on this- I am trying to run a serial video capture peripheral that is verified on an SE, but captures digital noise on a quadra. It was suggested it is out of sync due to software that might be tied to clock speed like some old games that run too fast...

I have two Koala MacVision serial capture boards, hooked to quadra 605 running 7.5.5. Both capture a single frame of wavy noise, regardless of the video input I try. Recapped one, same result. These are different internally, with one comprised of discrete logic/opamps. I’m trying to determine if...

I have two PCI cards that do not allow my MDD to sleep in MacOS 9- Adaptec USB and Keyspan serial. Going to sleep, computer immediately wakes back up. Is there any known workaround to allow sleep for PCI cards like this?

The slow scsi bus in the lc to q605 seems to be the limiting factor for system performance. I found an apple doc on pds dev stating a scsi pds card was possible- was a faster scsi bus pds card ever made for these machines? In addition to faster drive access, more headroom for rascsi future...

Quadra 605 has been solid for months. Forgot to reinstall the microSD card in Bluescsi, flashing question mark on startup. Turned off, reinstalled, startup chime, gray screen, cursor freezed after 1 second, doesn’t boot. Removing everything I can from the system, pram/reset switch doesn’t help...

Until recently, this MDD dual 1.4 would sleep reliably. Recently when I put it in sleep it wakes back up before the fans have the chance to spin all the way down. Trying to backtrack what has changed. Have you encountered this behavior? Any ideas of what to try? Already disabled wake for network.