@crazyben just download the files from GitHub and upload the zip file as it is at jlcpcb. In the further steps you also need the bom and picknplace files if you want them to assemble everything except the through hole components.
I am still waiting for the atx connectors to be delivered. Everything else (pcb, 10-pin connectors) has already arrived and is waiting to be assembled. And of course it has to work afterwards ;)
If you don't mind a higher price per adapter (import fees): I have 2 left and could work out the price.
Additional to Branchus‘ pinout I had RxD+ on TxD+ connected and GND to HSKi to HSKo. There are several pinouts for rs232 and rs422 out there in the www - very confusing. That was „my“ best-of version which was obviously no good idea.
You’re right, got that…
I see :( Though I hope not; the...
These are the connections on the loopback cable (tested various other combinations, this was the only one working):
RXD+ <> TXD+
RXD- <> TXD-
GND <> CTS+ (HSI+) <> RTS+ (HSO+)
It runs with no feedback and tells only pass/fail afterwards.
Check. To test the rs422 port to check full function, could I connect an SE/30 directly to the Q700 by using Kermit? If so, which cable could I use?
@Phipli @jeremywork Quick question: If it’s neither software nor hardware - could it be both? In other words: Could the ROM be affected because different routines for printing and serial tasks are existing? Maybe I damaged a connection from the clock to the ROM or so…
Both printers are untouched (in the sense of the housing being originally closed) and connected with two different proper power cables - the Quadra, too.
For the connection an original apple cable is being used.
After putting everything together again, I was doing some tests:
- Checked HD/FS integrity - both okay
- Updated drivers for StyleWriter
- Doing some plain text prints in 8.1 and 7.0.1 (clean, minimal system) on Image- and StyleWriter
- Setup a direct serial connection between an iBook and the...
Thanks for thinking along. I was using the LabelWriter a week ago, the StyleWriter some time in autumn on this machine successfully.
The ImageWriter was not tested with the 700 before I think.
I have cleaned the board last evening and give it later today another try. If it shows no...
Thank you for supporting me so much. Tomorrow I shoot a closeup of this area.
Sadly I cannot find any schematics of the Q board. Such were very helpful understanding and bugfixing the SE/30 with @Bolle last year.
Is the Zilog somehow connected to the quarz oscillator?
I‘m wondering if I...