I know under os9 that the dual is not much if any fast than a single cpu but under os x a dual 500 mhz would be like a single 700 mhz
please confirm.
ie my spare cube is complete disassembled with kernal panics over heating cpu i think
michael
I am upgrading my wife' s quicksilver with a sonnet sata controller and 1 Tbyte drive. We must have room for all those pictures.
all the picture end up in her user folder which is on the startup drive ie the new drive should I partition it or not. Having multiple drives does not work with her...
I was under the impression that usb 2 will not run under os 9.x so you are stuck with usb 1.1 speeds.
I do own a sonnet tempo 133 card so this is starting to sound like the best option. I could strip out all the scsi drives and go ide.
I also have a fw external dvd dl inclosure but no fw...
I agree with installing sata why bother!
in other posts it was suggested that to maximize the speed of the 7600 to install atto ul2s controller for faster scsi. I do own a sonnet ide 133 card that could be installed but it would be slower see other discussion...
Now that the 7600 is ripping mp3 and surfing the wed I feel the need for a dvd burner any suggestions?
I will soon get my atto ul2s installed I would like to pull the internal cd out and put dvd burner in. I have been searching and it appears this may not be possible with out switching to ide...
well I have checked the voltages and no issues the cube ran fine last nite. The day before the drive just stoped and then the machine did not boot ie no hard drive. May be the dc to dc board is over heating. This has happened with 2 hd's now. I am tring to get it to fail while I have a...
the hd were an apple 20G and and an owc 80 G IBM
the OWC drive stated it would work with the cube
what about the dc to dc board in the cube could it be bad?
michael
I have a mac cube that ran fine for about a year and the hd failed so I put a drive I pulled. this drive worked for a couple of months and it started having problems it would spool up the wind down to a stop, start stop over and over it was about 2 sec up and 2 sec down. so i ordered a new...
well I know the master slave jumpers are ok. the computer worker great for several weeks after the new hd. I reformateded and installed 10.4 clean and then ran tech tools to check everything it could. I will pull the drive and try to boot from the cd.
I had a bad hd and replaced it 2 weeks ago bad sectors.
now it has stopped starting up
1 it chimes
2 i get a gray screen no pin wheel
3 nothing happens.
i have tried booting off tech tools cd but no luck. same as above
this issue happened 2 times and the machine sat for some time and...
2 questions
1 i have a 867ghz quicksilver with 10.4.11 and what looks to be a factory apple scsi atto install can i add ide drives "i have several" with the scsi drive or must i get an ultra 3 drive. also with a scsi 2 dive work as well?
2 my other quicksilver 1ghz with 10.4.11 i wanted to...