Thanks for the replies!
I'll just leave it until I have lots of spare time/boredom.
Thanks for the Offer @ScutBoy, I'm in New Zealand though so shipping would be very $$$.
I got a IIci with a badly exploded battery, after cleaning it with denatured alcohol it looks like this:
The damage is definitely very bad around where the battery was, the oscillator chip is definitely gone.
Apart from de-soldering and cleaning under the rom chips, testing/repairing the...
Thanks for this, it's awesome! I tried getting Vicomsoft Internet Gateway working on a G3 with no luck before I found this.
Se/30 -> phonenet/localtalk -> Power Mac G3 (system 9.2 with localtalk bridge) -> macipgw vm
Can now easily share files between my Windows PC and the SE/30 by...
I got it up and running, but now it freezes after some time and won't boot again for a while.
Have swapped the ram around again a few times with known working simms,
Symptoms are a bit random, sometime it death chimes on cold boot but OK when reset, other times boots OK, it always freezes...
Thanks for the replies, I didn't know about the whole bank needing same size RAM and needing to be full, will try that.
I only have a working Mac Classic II, would that work testing 2 simms at a time in it?
With the replacement caps for the axial ones, the picture makes them look a lot taller...
Recently acquired an SE/30, originally it had just a vertical line on the screen and no chime.
I've re-capped the digital and analog boards. Washed the digital board with denatured alcohol.
Now it just shows the stripped screen and death chimes, same as here:
I'm fairly new to these kinds...