As the title says, looking to get some info on peoples experience using SCSI2SD on the later pre-G3 PowerBooks using the external PowerBook scsi connector.
Hey all,
I posted a thread in Software about having issues choosing a boot partition.
There's hardware aspects so this is a crosspost: https://68kmla.org/bb/index.php?threads/forcing-boot-partition-choice-in-openfirmware-2-0-1.39674/
Thanks for looking
I have a PowerBook 2400c with an Interware G3 upgrade card.
All has been well running 9.2.2 with the OldWorldSupport 1.0.1 added.
However now I am having a problem where it boots to desktop but never completes loading the Finder. If I try to load without extensions I get a bus error (presumably...
That’s a good question, it’s a Virgin Media router nothing fancy, with a 2.4ghz and 5ghz network (I’m connected to the 2.4ghz).
I’m wondering whether you’re right and the encryption is just too new for the older machine. I could try adding a very old router in the DMZ and seeing what that does...
Hey all,
Not been around for a while, but got back to playing with my PowerBook 2400c and ran into a wall trying to get the networking going.
So...
I have a 2400c running 9.2.2 (OldWorldSupport version).
It’s modded to support CardBus and I have a Lucent WaveLAN Turbo Silver card installed...
Hey all,
I'm thinking about using a Classic Mac running MacTerminal (or similar) with the mini din-8 serial port adapter-d to an RS-232 port which is in turn adapter-d to USB.
I think I can then bring this in to a TTY device on a 10.x running MacBook and send the terminal output to it.
Has...
OK, some good news :)
I got a new MLB/Port door/Keyboard/PRAM battery from a very kind person on here.
I put the logic board in tonight and my SSD started showing up. The RAM still just reads 32Mb of the 64Mb on it so I'm going to put that down to a faulty module maybe.
In terms of the PRAM...
Thanks, that's good info and encouraging.
Just to confirm do you think that a faulty PRAM battery/connection might aka the IDE bus?
I'll do some dismantling and cleaning tonight and see what happens.
Hey,
Got a follow up status report, and need some advice.
I upgraded the memory chip, from what I believed was 32Mb to 64Mb. Turns out it was already a 64Mb that showed up as 32. Hmmm so I changed it anyway. When I test booted out still shows as 32Mb.
I also fitted the SSD, turns out there’s...
Hello everyone,
I'm a new member, though I've been a vintage Mac collector for many years. Most of my collection has come and gone and currently due to space limitations I'm focused on some specific portable models I like.
I recently got a lovely PowerBook 2400c/180 on eBay that is in good...