Search results

I can mount more than two images on my Rom 01.  My CFFA 3000 is in slot 7, and additional mounts show up as slot 2 and slot 4.  If your CFFA 3000 is not in slot 7, there are restrictions on the number of images it can mount, due to how Prodos handles smartport devices.

You might be able to write single sided (400k) disks on your IIgs, though I'm not sure which software you'd use.  Copy II Plus does support single sided disks (in fact, I have an original Copy II Plus 3.5 disk that is single sided), but would only support images in its own format. Hmm.... I...

I bought one of these on eBay, but my Mac 128k I picked up cheap ($50 plus shipping) works too well to swap this into.  So I'll save the 9" monitor for another project, I'll end up with a dead compact Mac sometime.... As to 1024x768, the manual shows that it only supports the 8514 interlaced...

I have the Quadra 610 Houdini 1 card on the way and a Performa 6100 DOS card on the way, both with their PDS risers, and the appropriate adapter cable for video / joystick... for about $100 total from eBay. Once I have them, I'll let you know how they work for me in the Quadra 610. There are a...

Has anyone here tried to take the "Houdini I" Quadra 610 DOS card's riser and use it with the Quadra 6100's DOS card? I've found evidence online that it should be compatible, and you'd end up with a 486DX2/66 CPU instead of 486SX/25, and with sound blaster sound card support. I'm not sure, but...

The Apple Disk ][ drive is a Shugart mechanism, it's based on the SA390 design (an SA 400 floppy mechanism without the controller board), which was made specifically for Apple, as they wanted the least expensive 5.25 drive they could get. Here's the full story...

I've purchased quite a bit from DrKenB on Blujay, he has the Apple 3.5 case / cable / circuit board for $19.99 (USD) on his site, or a complete tested 800k drive for $45: http://www.blujay.com/?page=profile&profile_username=drkenb Everything shipped quickly and was well packaged. He has...