Oh no, i already tried it. The Key C works only on the Newer PowerPC and Intel Models. On the old 68K booting from SCSI CD-Drive is not so straightforward
I have the problem, that the drive is recognised by the System (Is correctly displayed in Apple System Profile) but doesnt mound Data CDs (ISO9600).
I found FBW Toolkit Driver, which running just fine now. It mount anything.
Thanks
can be closed
Hello guys.
I'm searching for the way to install MacOS 7.6.1 from SCSI CD-ROM Drive (I have 3: Pioneer PCP-PR1W portable, Panasonic KXL-810A Portable and Yamaha 5,25 CD-RW)
What i need is: an Universal Boot Floppy Disk, which would load CD-ROM Driver.
Do someone have such floppy disk / image...
Hello guys
Maybe someone had similiar problem and know the solution. I have a small external SCSI CD-ROM Drive Panasonic / Matshita KXL-810AN.
It can be attached on PCMCIA SCSI-II Card or straight to Macintosh SCSI-Port with an 25pol to 50pol SCSI Cable / Adapter.
I try to get it running on...
Installed MacOS 9.2.1 and 9.2.2 Update on my 2400c/180 using OS9Helper.
USB CardBus card hangs the System and prevent it from booting, when inserted :(
Hi guys,
On My PowerBook 2400c/180 i have a Problem, that all 64MB EDO RAM Module are recognized with half of capacity (32MB instead of 64MB)
Which EDO-RAM Modules i should use to get 80MB RAM ?
I know, the thread is old... But if someone still need an PowerBook 2400c Display or other parts - let me know. I"m thinking in disassemble my 2nd PowerBook 2400c to keep some parts as spare and sell some.
I can share my experience here:
I had used:
Cheap CF to 44Pin Adapter from eBay + CF Card
KingSpec PA25 32GB PATA SSD
Toshiba 128GB mSATA SSD with red DeLock mSATA to 44Pin PATA Adapter.
All 3 combinations have worked like a charm in this PowerBooks:
PowerBook 1400c
PowerBook 2400c...
Small correction: Tried it again: 2x boots were fine, 2x boots were stuck at MacOS 9.1 logo.
So there seems really some problems with cardbus cards on boot here,,,,
Hello guys!
I'm new on this forum, my name is Pawel, i'm from Berlin / Germany.
Have a Powerbook 180 and 1400c. Searching for a 2400c. So if someone wants to sell his - i would buy it :)