Hey all,
I recently got a pair of Quadra 950s, initially both ran just great, but one soon developed a fault. The machine chimes, completes the RAM test and loads up video, it looks like it gets to just the point before it initializes the toolbox, and then just hangs. The grey screen still has...
Hey all,
I've recently picked up a Power Mac 9600/350, unfortunately its CPU card is unwell. I know the machine is good as it works fine with the Sonnet G3 233Mhz card I picked out of my 7600. However, when the 350Mhz 604 card is installed, it'll just chime and the monitor will stay dark. It's...
Hello there,
I recently picked up a battery damaged Macintosh IIfx and I'm experiencing some strange behavior with it. Here's basically a summation of where things are at:
Current Situation:
Will not recognize any SCSI devices except for a BlueSCSI.
IIfx will consistently sound the death...
Hey there,
I've been having a bit of a nightmare trying to get my Macintosh II Rev. A to power up. My board is one of the older models which doesn't have the SMD electrolytic capacitors on, it's only got the axial caps which don't typically leak (info on this board here...
So I've got a Mac SE which until recently was working perfectly. However, I have installed a set of SIMMs totaling 4MB, having increased this from the 1MB SIMMs.
After installing the new SIMMs, the machine started getting these one-pixel thick vertical jail-lines. Outside of the annoying visual...
Hello!
First time poster here, but long time watcher. I've recently been restoring this PowerBook 165 that was sold as parts. I've re-capped the LCD and fixed the Connor Hard Disk using the epoxy resin trick. However, upon putting it back together after repairing the HDD I've been getting this...