Search results

Hi A piece of paper can’t stick to the CRT screen when Lisa is turned on.

I think I have HV because of the back of the glowing filament near the CRT neck. I can’t feel the screen pull the hairs on my arm as you say.

The CRT is powered but no picture on it. I suspect the video ROM to be the culprit. It is written 341-0230-A on it instead of 341-0229.

I will power it on without the upper bezel and see if it glows in the dark.

Absolutely no sign of life from the display.

Hi all I powered on my Lisa this weekend and all I have is a black screen. The power lights on, the widget is making a loud noise and there are three bios when no keyboard is plugged in. The PSU is ref. 699-0190 which is an 1.8 amp configured for european countries. I have already removed the...

I am interested too (France) !

Hi all, I would appreciate some help to properly configure my accelerator. On the front of the board are 3 jumpers that I would like to know how to configure.

Auto reply : I have found an ISO with drivers for all MacPicasso cards : https://macintoshgarden.org/apps/village-tronic-graphics-driver

Hi all I have a MacPicasso 340 and looking for the drivers in order to accelerate Quickdraw on a powermac. Nothing on WebArchive.org and older links on this forum no longer work. Thanks Pierre

Hi i also have a IIx that need some fixes.  So can you please tell me what capacitors types and how many of each type you used for recap ? thanks

Hi i only have tested the Rocket stage II in my IIfx with RocketShare and it works fine.  When I am back home (holidays in Maui right now :ii: ) I will give RocketWare a try.  Thanks

Hi  thanks for the tip : the picture once zoomed  helped so much ! I am using a quite decent config at the time / - Mac IIfx with 20mb RAM - system 7.6.1 - radius rocket stage II with modded cooling  system (active fan) but without daughter boards (which I am actively looking for) - Radius...

Hi all ! I've just bought a radius rocket stage II to drop into my IIfx. I have RocketShare installed but when I try to launch mission control for the first time it asks me to put a serial number written on the first floppy disk which I don't have. So could any one help me with this ? Thanks...