Search results

I have a Mac Classic that (after recapping everything) basically works perfectly, but i'm not getting any sound from the on-board speaker. The sound does work if i plug something into the headphone jack. Is there an easy way to repair this speaker? I haven't had a chance to check its impedance...

Hi all, I have a Classic II with a working logic board but the analog board was not in good shape. Some capacitors were leaking slightly and the fuse was blown. I replaced the fuse and I replaced all the capacitors and cleaned the board, but as soon as I tried to turn the machine on I saw a...

I have a Color classic that doesn't boot that I recently acquired. The analog board seems to be working, because if I remove the logic board it powers on. Also, the logic board itself also looks to be in very good shape. Nonetheless, when I try to power it on with the logic board inserted...

I am a beginner at repairs to these machines, so please bear with me. I recently was given a poorly-maintained SE/30. On turning it on, all I get is zebra stripes on the screen and it's clearly not booting at all. Upon opening it up and looking at the LB, I see that the PRAM battery has been...

In addition to a Mac SE I recently got a Mac Classic II (rev A, with the 4 rom chips). This one apparently used to work, but now when I power it on, the fan turns on but the CRT does not come on at all, and no startup bong is audible. Any ideas where I should start? I assume I should re-cap the...

Hi, I've recently purchased a Mac SE. I thought I would have to recap the logic board (I've never recapped anything before so was somewhat scared of that), but it looks to me as though the board might already be recapped. As you can see in the attached photo, all the caps are these new-looking...