Search results

Next time you get the question mark, try to boot off a floppy to see if it can detect the scsi bus then. Do you have any external SCSI devices?

I strongly recommend against using lead-free solder as it's far harder to work with then your standard leaded solder.

I hooked up my external SCSI CD drive to my Quadra through scsi. And connected the RCA jacks to the back of the Mac. Tried internal audio in option, external audio, internal cd, all 3 don't work. No audio from an audio cd. It sees the disc fine and I have foreign file access on Mac OS 8.1...

Yea. I figured out the partition problem. I was booting off of a custom boot disk with Disk Setup 1.5 (unable to boot from cd) which can't format bigger then 4gb. So I will work around it by booting into a temporary install on a separate hard drive and formatting the drive there.

Got the replacement SCSI cable, drives are seen just fine. Now to deal with partitioning a 76gb drive. (Apple's tool won't allow me to create more then 8 partitions :( ).

Until now, I decided to do it proper and pulled the logic board out. Good news is as far as I can tell the logic board is fine, buttons are fine and responsive. I put it in the case and buttons feel much better now. I suspect the logic board's latch to hold it in place wasn't latched properly by...

There's a terminator on the end of the cable. What I've read though is that Quadras 950 are terminated on the motherboard and hard drives should not be terminated. http://support.apple.com/kb/TA47480?viewlocale=en_US I've ordered a replacement cable. I have a 76gb sca scsi drive with a adapter...

I'm having a terrible time hooking up harddrives to my Quadra 950. I'm trying to redo the cable layout to prevent any damage or strain to the cabling but I don't have anything to really go off of, can anyone post a picture of the SCSI cabling of their Quadra 900/950? I also checked the...

FIxed it temporarily by wedging a screwdriver into the interrupt switch. Not the best fix, but it'll do.

Found it!

I jammed a piece of paper into the interrupt button and that allows me to boot the mac, I'm still doing some experimentation

So my Quadra 950 seems to have issues booting, especially when its cold in the room (I'm talking real cold like in the 50s). I can leave it running but after a while it'll power up, or I can heat up the room to the higher temperature and that'll allow it to bootup. When I run into this issue, it...

Makes me feel glad about picking up my 950 for 30. :)

So I have what might be considered a very noob question, but I want to make sure I don't break anything or cause anything to break prematurely. The question is, What's the proper procedure for removing/adding Nubus cards, specifically how do you get the clip to secure the card in place, do you...

Unfortunately it wasn't those games. If anyone has an Image of the Introduction to Nautilus disc would help as well.

I'm looking for a game that I played a long time ago (I believe a demo of it was on a Nautilus sample disc). However I forgot the name of it and can only offer a vague description, if you think I know what I'm talking about, please feel free to reply. So the game was a two dimensional, where...