Recent content by stevenh

The shriek is the inducers/coils? I've asked if there's a part we can replace with nowadays over here: The left coil is making the noise and sometimes it seems to 'charge' enough to shut up and let the PowerBook boot.

Hi all, Sorry for digging up this post... but perez6991, you've written an amazing thread and I hope to contribute by providing extra help for people with unhealthy PowerBooks. My PowerBook is making an awful squealing/hissing noise when it powers up (or when you're holding the power button...

Excuse the double-post. If anyone wants to use an Apple Multiple Scan on an 'older' Macintosh then make sure you turn DDC OFF. This can be done via the Information tab on the OSD. Doing this and then cold-booting allowed me to select all the resolutions I wanted. Well, up until 1024x768. I'm...

It sure is. One interesting point in that doc is the reference to a DDC control. I'll try this tonight.

VRAM is full. When i grounded the sense pins, it outputted 1152x740 perfectly fine. My question is: Can the Quadra 950 use the 'extended sense pins' of the Multiple Scan monitors?

Howdy, AppleVision is definitely installed and I even tried the "Apple Multiple Scan Display" install disks, but these just seem to overwrite files that were already installed by Mac OS 8. I then tried SwitchRes, but that didn't give me extra functionality. After a little reading...

I was hoping this monitor was going to have a Trinitron tube, but it turns out when I picked it up that it obviously wasn't. http://www.everymac.com/monitors/apple/multiple_scan/specs/multiple_scan_720.html Regardless, this worked fine with a PowerMac 7200, but the Quadra 950 can't go higher...