Recent content by schreinerman

@twelvetone12 attached the schematic. The PCB is designed, so it can be used as: 1) D-SUB-9 RS232 to Wifi Bridge (powered via USB Micro) 2) 8-pin Apple serial connector to Wifi Bridge (powered via ADB) 3) Internal PowerBook 1xx Series modem to Wifi Bridge (SD Card of BlueScsi accessible via old...

I have it ready: My universal SLIP Board which can be used internally with PowerBook 100 Series, but also externally with several options. For sure if used internally, all connectors must be not assembled but the bottom connector. The RJ45 Connector will be left open, so an extension cable of...

In the meanwhile I found the "Macintosh PowerBook 100 Developer Note" PDF. I'm currently planning a board that fits into the PowerBook 100 Series internal Modem Slot, but with Micro-SD Card holder extended from BlueSCSI-v2 Powerbook. But the same board will have also an assembly option, so it...

@sutekh do you have the pinout information of the connector? I had a similar idea and found your post. Also if it is not the fastest solution, it is al least a solution to connect to the "modern" networking world...