-
Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.
saybur's latest activity
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.That would be a sweet solution. I wonder if it might be useful to the RaSCSI folks too? Some kind of Mac program that could execute...
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.Thanks! More news: experimental (and I mean experimental) CD-ROM support has been added to the "devel" branch on Github, based on the...
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.After a bit of a break from the project, I'm back with a bootloader. This is generic enough I made a separate project for it, located...
-
Ssaybur replied to the thread TashTalk: Single-Chip LocalTalk Interface.This is an extremely neat bit of work, well done!
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.The freezing at shutdown seems to be a persistent source of trouble. I think I recall (maybe in the vanished posts) you mentioning some...
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.Good catch, I've only been testing on V1 boards so far. The issue is the lack of a DCLK signal on the V2 boards. I'll get the code fixed...
-
Ssaybur replied to the thread SSHeven: a modern SSH client for Mac OS 7/8/9.This is great, thanks for doing all the work to put this together!
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.Not too much to report right now: IMHO the main branch on Github is in pretty good shape at the moment. I'm working through a few side...
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.The lack of auto-mounting is probably that INQUIRY thing: as I recall the current version may not be spec-compliant. I added an issue on...
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.Oh yeah, I seriously doubt the Ethernet drivers will work on modern OSes. It definitely doesn't work right in Basilisk II either, which...
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.The Sigrok gave great output, thanks for that. It's failing after starting an INQUIRY command. The 0x5F is the LOGIC_MESSAGE symbol...
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.The big one was correctly respecting the DISCONNECT message sent from the Mac during certain phases and extending the disconnection...
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.That looks great, congrats on the new board!
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.That's probably the firmware logic more than anything else. The original transmission routine was really bad about handling collisions...
-
Ssaybur replied to the thread SCSI to Ethernet Adapter on New Hardware.Fantastic news! I'm really happy to hear that you didn't have any crashes. Those speeds are also quite good. Your FTP setup is obviously...