Recent content by samurai-j

The Japanese version of the ReadMe has this to say about System6 If you are reinstalling System 6.0.7, please set the monitor in the control panel to black and white before installing. After the installation is complete, copy the Desktop Manager contained on the floppy to the system folder...

The system should be v7.1. If it is v7.0.1, there is a problem. There is a warp030 v1.5 in the control panel, The only difference is that mine is the Japanese version. Put TransWarp compact in the INIT folder, The coprocessor is recognised, Remove it, only 68030 MPUs are recognised. I think...

I also have a TW1340. I set it up quite a while ago, I don't remember how I did it, Compact Virtual recognizes the TW1340 and the 16mb memory.

It becomes an Amazon style, but cardboard is cute. Good at artistic!

I checked some spare IIfx logic boards, On the surface of L3, consider 0R0 notation, 0 Ω. I burned C1 tantalum capacitor in the past, I could exchange it and repair it.

Although the viewing angle is narrow, Operability on Old Mac is good. It was a used item, which was $27.   FlexScan L465 http://www.eizoglobal.com/support/db/products/model/L465

I uploaded it https://goo.gl/photos/U6BdddPCMnyDEMyD8

Because there was a mistake a bit, I plan to release the photos at a later date. I'm sorry.

Repair of IIfx is completed and it works perfectly! I found an IBM DDRS HDD that works without problems. Therefore, the SD, CF drive has not been created yet. I will introduce my collection again.   https://goo.gl/photos/NYwM7in9PxXesEku8     I received a PM from which the photos disappeared...

Many of the SuperMac's Thunder series cards, ROM version 3.0 or later supports PPC. I feel that you misunderstood it. I also have Radius LeMans GT (v1.01). In v1.01, both 68k and PPC are accelerated.   Your v1.01 is OK! :)

OlePigeon, Themk, thank you! I plan to repair IIfx with a solid electrolytic capacitor.

I have disposed IIsi. Therefore, the Sonnet adapter has never been used. The photo product is Tokamac IIci 33 Mhz version of the same product as Sonnet Presto 040. Tokamac IIci 33 Mhz also works with Presto 040 driver software.   You are really active and nice geek  

I do not know if this is useful, It is the image of my IIsi adapter. It looks like a Micro Mac, but it looks different. I think it depends on Presto 040 so it may be different from Daystar.    

Daystar's adapter and PAL, I do not know how it is involved. I'm sorry.   There are two kinds of Tokamac for IIci. 25 MHz is for photograph. 33 MHz is the same product as Presto 040 manufactured by Sonnet Technologies, There is no performance difference from Daystar Turbo 040.   PAL is not...

I have to repair IIfx first. The manual is not original, it is a copy. Important things about PAL are not written.   Since there is no time, PDF conversion of all pages is currently impossible. I shot the page only for PAL. Extra pictures of the second piece :)