Recent content by pyranger

  1. P

    30Video: New video board for SE/30 / IIsi / more?

    sweet. thanks for the details. looking forward to seeing how this project progresses. good luck!
  2. P

    30Video: New video board for SE/30 / IIsi / more?

    nice. I really like that u can go 'classic b&w mode' then switch to color when u want. My tube has menu-bar burn-in (not a total show stopper) and brightness is getting a bit faint (or more likely my eyes are getting older), which makes this a very interesting replacement. Going to work back...
  3. P

    30Video: New video board for SE/30 / IIsi / more?

    how does it look in B&W mode?
  4. P

    CD images for MacOS

    what about think pascal manuals?
  5. P

    The Manhole

    just listened to this the other day. really got me itching to explore these games https://theretrohour.com/the-making-of-myst-and-riven-with-robyn-miller-the-retro-hour-ep60/
  6. P

    RGBtoHDMI for a SE/30 (settings from Plus and Classic 1 won't work)

    nice job! Say, I was reading in my newly acquired Macintosh Bible 3rd Edition that an SE/30 has color Quickdraw in it's ROM. I don't suppose there is any way to extract that color from the motherboard with the pi RGB2HDMI?
  7. P

    FOUND: MacFORTH early Mac professional dev system for Forth code

    very interested if these are still available
  8. P

    TashTwenty: Single-Chip DCD (Hard Disk 20) Interface

    1. i added a 256 sector offset to the makeimg.py code which successfully created offset in the partition when written to the sd card. Made no difference, as you predicted. 2. not seeing lights blink even with no card, so these leds may not be connected in a way to communicate trouble codes. i...
  9. P

    TashTwenty: Single-Chip DCD (Hard Disk 20) Interface

    1. sorry. I may have made this mistake at some previous point, but presently am using: sudo dd if=608_020M.img of=/dev/sda 2. comparing my sectors (sdb below) to caymac's sd card (sda below), his starting sector is 256 whereas mine is 1. perhaps this is the problem?
  10. P

    TashTwenty: Single-Chip DCD (Hard Disk 20) Interface

    thanks for the response. FYI: Caymac also graciously helping me out. I sent him my .dsk image and resultant .img file and he's going to take a look. Answering your question: 1. python makeimg.py 608_hd20.img 608_020M.dsk - 2. for writing to the card, I have tried: a. raspberry pi disk...
  11. P

    TashTwenty: Single-Chip DCD (Hard Disk 20) Interface

    hello, I purchased a tashtwenty budget from Caymac and it works fine with the sd card that was shipped with it on my 512ke. However, all of my attempts to create my own sd card using makeimg.py have been failures - none have been recognized by my mac even when booted from 6.0.8 floppy. I have...
  12. P

    Apple iigs setup

    works great on my set up as well. here's a good link. http://www.apple2faq.com/apple2faq/iigs-to-hdmi-using-an-extron-rgb-hdmi-300a/
  13. P

    Getting my SE/30 online

    piscsi works great https://github.com/PiSCSI/piscsi/wiki/Dayna-Port-SCSI-Link https://www.youtube.com/watch?v=-qRG-0Pne-I&ab_channel=MacintoshLibrarian
Top