NJRoadfan's latest activity

The level 2 protocol was likely FDDI (100Mbit) on these early fiber networks. Later on it was easier to just run Ethernet frames over...

As per the GS/OS source, the following ROM detection is done to determine if an "old" (not High Speed) Apple SCSI card is installed. It...

Make sure both the modified "SCSI.Manager" and "SCSIHD.Driver" files are in the "DRIVERS" folder of the System Folder on your startup disk.

Do not install the driver. You should be able to partition and access a drive from GS/OS without it. I suspect that the ROM on the card...

I haven't played with the HFS driver in Linux, but I would have thought they would have figured out resource fork handling. Pretty...

FWIW, here is the original end user manual for the card...

I don't know what GGLabs changed on the card that required a change in the driver. Apple's cards are pretty straight forward, they...

The "Wings" A/V card supports an external TV tuner adapter. ATI sold it as an option for their cards (ATI XClaimTV) and connects via the...

https://web.archive.org/web/19980509061156/http://www.apple.com/powermac/g3/specifications.html...

As this is right up their alley, you may want to post about this over on the SHMUPS hardware forum...

Case closed, move on.

That full size crystal with the bent legs IS the original part shipped with the card. I was able to push my card to 12Mhz. Anything...

6.25Mhz points to an earlier card I think. The GAL set installed is a good indication as well (more rev A parts = earlier card). A...

You should be able to lever is out slowly with a pick or hook style tool. At least that is what I did on my card, but I think mine has a...

None of this is a surprise. Tons of "green screen" applications are in use today. I use a TN3270 session daily at work along with many...