-
Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.
mmjs's latest activity
-
mmjs replied to the thread TashRouter: An AppleTalk Router.You are completely right, no intervention is necessary. Working great with the code as shipped. Thank you! -
mmjs replied to the thread TashRouter: An AppleTalk Router.Happy to report that once I changed destination_network to port.network in the latest code the 512K is happy! Additionally, I found a...
-
mmjs replied to the thread TashRouter: An AppleTalk Router.Interesting! In this particular case it seems like a direct connection actually worked *better* since I could at least see and browse...
-
mmjs replied to the thread TashRouter: An AppleTalk Router.Thank you for the quick turnaround! This now works with all my regular LT and LToUDP machines, with both configurations (ie. both with...
-
-
mmjs replied to the thread TashRouter: An AppleTalk Router.Yup, here's my config without seed: import logging import time import tashrouter.netlog from tashrouter.port.ethertalk.tap import...
-
-
mmjs replied to the thread TashRouter: An AppleTalk Router.FYI, when using @finkmac's tap solution changing to destination_network=port.network in sending.py breaks functionality. This is with a...
-
mmjs replied to the thread TashRouter: An AppleTalk Router.Hey folks, I've been seeing something similar with a 512K. Effectively it times out after about 85 seconds after connecting, and during...
-
mmjs replied to the thread SE/30 logic board replacement woes.Definitely sounds like you will have to start to check additional lines across the board to troubleshoot this. One note -- the GLUE is...
-
mmjs replied to the thread SE/30 32Mhz clock and UH7.I finally closed the loop on this and wrote a lengthy blog post about what it took to get two working SE/30 boards out of this mess :)...
-
mmjs replied to the thread SE/30 logic board replacement woes.Feel free to share your pattern if you've got a pic, might provide some insight! Also, are you using the oscilloscope to check out your...
-
mmjs replied to the thread SE/30 logic board replacement woes.Not necessary to get to question mark! I think the original ROM may fail to boot a system without an FPU, and custom ROMs like the...
-
mmjs replied to the thread SE/30 logic board replacement woes.Hi, I've gone through a pretty difficult rebuild recently (some details here...
-
mmjs replied to the thread SE/30 FPU trouble.Thank you both @obsolete and @Melkhior ! In the end this was definitely caused by bad contacts in sockets. Thanks for pointing towards...
-
Hey everyone, This is a follow up to this thread which seemed to end in success, but after a couple of weeks using my newly rebuilt...
-
