-
Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.
mg.man's latest activity
-
mg.man replied to the thread Portable Hybrid: Looking for 3 US testers.That would be awesome! I'm happy to cover the shipping - no need for you to be out of pocket! I'll drop you a PM -
mg.man replied to the thread Portable Hybrid: Looking for 3 US testers.I've had several MLA'rs send stuff to me recently - they've not used the USPS "Priority Int'l" - which is pretty outrageous - but just...
-
mg.man replied to the thread TashTwenty: Single-Chip DCD (Hard Disk 20) Interface.Thanks, will do!
-
mg.man replied to the thread TashTwenty: Single-Chip DCD (Hard Disk 20) Interface.Interesting. Is the firmware available? I've slso run into issues with a couple of my uSD cards. My 1704s and PICkit3 have arrived, so...
-
mg.man replied to the thread Macintosh SE/30 logicboard recreation (thread revival).@CircuitBored, @cannfoddr, I believe @Kai Robinson might have one or more available - you might want to drop him a PM.
-
mg.man replied to the thread Can Anyone Provide Any Information On This "Prototype" Power Macintosh 6360?.Ha ha... "imaging" 🙄
-
mg.man replied to the thread Can Anyone Provide Any Information On This "Prototype" Power Macintosh 6360?.I'd also suggest you create a "Help needed imaging a System 7.7 drive" - that will probably get some attention... :-)
-
mg.man replied to the thread Can Anyone Provide Any Information On This "Prototype" Power Macintosh 6360?.Dang... wish I were closer, I'd be happy to help - but there's (literally) an ocean between. 😉 This isn't going to help directly, but...
-
mg.man replied to the thread GCC HyperDrive troubleshooting - drive doesn't spin.Another option might be to locate a SCSI version. Looking at one of mine, it appears the connections to the drive mechanism are the...
-
-
mg.man replied to the thread GCC HyperDrive troubleshooting - drive doesn't spin.Ahh... there is a decent pic here - https://www.ebay.com/itm/314018414725 - which indicates the 2nd component is just a resistor. You...
-
mg.man replied to the thread GCC HyperDrive troubleshooting - drive doesn't spin.Could also be 2.7uF? Found this as well - https://www.ebay.com/itm/260894785468 :unsure:
-
mg.man replied to the thread GCC HyperDrive troubleshooting - drive doesn't spin.You might be lucky, and it's just the larger one that failed, and the 2nd one is just covered with the first's innards. That looks very...
-
mg.man replied to the thread TashTwenty: Single-Chip DCD (Hard Disk 20) Interface.No dice... just the flashing floppy. Swapped for the 4gb, booted straight away. So, my limited experience seems to align with...
-
mg.man replied to the thread TashTwenty: Single-Chip DCD (Hard Disk 20) Interface.Spoke too soon. 2gb "generic" uSD will work once, then throw up the flashing floppy on subsequent boots. The 4gb card works every...
-
mg.man replied to the thread TashTwenty: Single-Chip DCD (Hard Disk 20) Interface.FWIW, I was working for IBM back in '84 and we had one of the original Macs (behind closed doors) to check out all the hullabaloo about...
