• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Recent content by lucaseverini

  1. lucaseverini

    ProtoCache for the SE/30 - What's the status?

    Hello, I was following months ago the ProtoCache1.1 project for the Mac SE/30. Searching now on all threads isn't clear what's the current status of that project. Is it dead or still in development? I'd really like to get one for my needy SE/30... Thank you! Luca Severini
  2. lucaseverini

    Outbound Notebook 2000 and 2030

    Hello, Does anybody know if the Outbound Notebook, the Macintosh compatible notebook sold in the early 90’ by that company with the kangaroo logo, model 2000 has any other difference with the model 2030, other than the CPU/ROM/RAM (2000 should have a 68000, the 2030 has a 68030) daughterboard...
  3. lucaseverini

    Repairing a Radius 16 Accelerator (Plus)

    Thank you for the photos. I think I got it. Accordingly with page 10 of analog board schematics at http://home.earthlink.net/~gamba2/images/plus_analog.PDF the yellow wire connects to +12V (pin 10) while the violet one connects to ground (pin 7). On the 4-pin plug in the accelerator board...
  4. lucaseverini

    Gemdos + GEM for lisa

    Hello, I tried to create a 400K Lisa floppy with both Dart and DiskCopy 4.2 Floppy creation doesn't report any error, but when I boot the Lisa with that floppy, it stops with the hourglass after 10-20 seconds. I have a Lisa 2/10 with 400K floppy, 2MB Ram, X/Profile and SCSI disk (tried with...
  5. lucaseverini

    ProtoCache1.1 - IIsi/SE/30 PowerCache Adapter Prototype

    Great Job!! When is ready, I'd like to buy the full size one for my SE/30. If you already have a list, please add me. Thank you! Luca
  6. lucaseverini

    ProtoCache1 - IIsi/SE/30 PowerCache Adapter Prototype Development

    Hi, I read all the thread. Very interesting and useful project. Congratulation!! As owner of a SE/30 with an Asante NIC who would like to add an accelerator too, I really hope this project can be completed successfully. All the best, Luca
Top