I've got an Applied Engineering QuadraLink, which both the 21st Century A/UX FAQ and the box say are A/UX compatible. How do I make A/UX use the card? Driver (if so, I don't have one on the AE Shadow floppy) or just configuration?
The card works fine in Mac OS 7.6; I've tried running newconfig...
What ID should the attached disk be? How do I initialize/format the disk? If the attached disk is not formatted, is that why I'm getting the "error" "no disk" during startup with a disk connected?
Thanks for the confirmation that it does have SCSI.
Well the card is called a "Disk IO" in the diagnostics utility, it has a 50 pin IDC connector, and came with a lead that fits the 50 pin IDC, labelled SCSI; when the card is initialised by the extension, it shows "error" "no disk" on the extension icon, and I've plugged an incompatible disk in...
So to confirm, if I install ProTools 3.4 free, install just the DigiDesign Elvis (it's one of these , so it does have SCSI) and connect an interface and a disk it will work?
Obviously I will leave out the DSP Farm and the TDM cable as I will not have a TDM license.
What interfaces can I use -...
Well the licensing stuff is kinda disappointing. I should have an intact install and license (I hope) if I can convince the original HDD to spin up...
The interface cable is also a bit of a problem if the wiring isn't SCSI standard - my cards didn't come with the cable and none of the...
That makes sense, as A/UX is "running" Macintosh System 7.0.1. I was wondering if I was maybe missing the right enabler in Mac OS 7.6.1.
So if I got my hands on one of the audio interfaces, all I would need is a SCSI cable to connect it to the card? Approximately what version of Protools are we...
I've got my hands on a Quadra 650 (sold as "powering on" only) and have worked my way through sorting it out and speccing it up: dead HDD replacement with a SCSI2SD, intermittent CD-ROM replacement (from a AppleCD 600i to an AppleCD 12x), PRAM battery replacement, fitting extra VRAM (up to 1MB)...