Also you should be able to download the bootstrap image a d the 6.0.8 image from here mount them both and do what you need.
https://macintoshgarden.org/apps/rascsi-68kmla-edition
RaSCSI is just using a file as a raw disk. The only way to do this with a real Mac would be to have an RaSCSI or BlueSCSI and format a drive then make the image.
The way Mini vMac works with drives is it basically treats them as very large floppy drives. This is why there is no driver...
I dumped the manual that came with mine to Archive.org. Looks the same as one on bitsavers.
https://archive.org/details/10-switch-adapter-15-dm-to-hf-10p/mode/2up
I have a Macintosh Classic I which has been recapped, logic board and the analog board.
After recapping the logic board I tested it. The thing booted up as it did prior. I moved on to the analog board as the CRT was just a bit wobbly. While testing after that recap it will seek the floppy...
Does anyone know the part number for the analog board yoke connector? This is a 630-0395 model board with the larger connector. I have one that is fairly yellow and would love to replace it.
I'm repairing a Classic logic board which corrosion hit the IC at Q1 near the SWIM chip. Before purchasing a new part I wanted to confirm that I had identified the part correctly. Does anyone know if Q1 is the -10v voltage regulator pictured on the datasheet below...
https://macintoshgarden.org/apps/disktwin
Not knowing much about the software I couldn't add compatibility information. Update the record as needed. Better screenshots would be good.
I don't have a great answer. I had a 28.8 model which was upgraded to I believe 56k via a socketed chip swap. Ordered it from US robotics for about $20. My phone line didn't support 56k so I don't fully remember if the upgrade was just to 33.6 or if it was to 56k.