I cut a 24 Pin ATX Power Extension Cable in half after making sure the pin-out was 1:1, worked as expected:
https://www.amazon.ca/gp/product/B000FL60AI
It is working well now! The offending extension was Décor - lets you set a wallpaper. Since I have to choose, I choose Exposé for sure :-)
I am also running into the issue where triggering again does not work while dragging. Neither by hotkey or by dragging to the corner again. System 7.1.
Just wanted to say super excited to try it out, and you'll have another user :-)
On my 7.1 on an SE/30 + Accelerator I get an instant bus error, but I haven't fiddled with other control panels/extensions and all that, will report back soon!
If I am interpreting this correctly, does this mean we can run a Turbo 040, MacCon AND a Radius Pivot which wasn't possible before?? Wow! I thought I was at endgame for SE/30 (3 stack), this might have me looking for a Turbo 040...
Wow that’s awesome, so not only PowerCache but Turbo 040 too! It does make it feel a lot faster. Without the cache the CPU is always waiting on a 16mhz bus for memory access.
Summary: if you are using a TwinSpark with a Universal PowerCache, you are not getting full speed compared to the Socketed PowerCache. This is because the cache is not enabled even if it is turned on in the control panel. To enable the enabling of the cache, add a jumper between C11 and C13 on...